Creating Replant or Fertility Prescriptions from the Stand Count Heatmap

Creating Replant or Fertility Prescriptions from the Stand Count Heatmap

After a stand count mission is completed, you can create prescriptions for replant or fertility recommendations for specific fields. 
There are two ways to create prescriptions: 


First, from the field level: 

Open up the field that you have determined to need immediate action with a replant or custom fertility application . 
Once you are in the field, select the zones button at the top of the histogram.


Here, you will be take to the zones tab. 
If you agree with the zone map created from the heatmap before, you can add your prescription right away. 


If you would like to edit the number of zones or size of zone acres, select the edit zones button.
Here you can edit your zone number, management area size per zone, and draw custom zones. 
Once you are done editing click save. 



You will then be able to add your new replant or fertility prescription. 
Select use RX for export and save. 



After you save, you can download your new prescription as a shape file (in blue) and upload it to your monitor for your herbicide custom application. 
You can also export a load map as a pdf that will have your rates and zones on it. Simply hit edit by the prescription name and then the export icon (in red) at the top of the prescription. 
If you need to make a new prescription with these exact zones, you can duplicate the zone map for the new prescription. 



Second, from the zones tab: 




Select the field you would like to create a zone map for from the right hand side fields list.
Click on the zones tab in the left hand navigation column. 
From here, create new zone. 



Here you will select your parameters for creating the zone map, the number of zones, and the area management size (if applicable). 
You will have many choices of parameters to customize. Typically we use: emergence count, Planetscope NDVI, or weeds heatmaps. 


Once you have selected your parameters, you will be ready to create your new prescription following the steps above in the first method. 



    • Related Articles

    • Variable Rate Herbicide Prescription from Early Weed Heatmap

      Inside the Taranis Webapp, you can take a weed heatmap after a SmartScout mission and create a variable rate prescription.  There are two ways to create a prescription from a heatmap.  First, from the field level: ​ Open up the field that you have ...

    • Flight Scheduling During the 2022 Season

      IFS - Intelligent Flight Scheduler 2.0 Overview One of the most important elements of a successful Taranis service is the timing of our flights. If flights are taking place too early, the imagery outputs will not provide the required data and will ...

    • Taranis 2023 Season Service Plans

      Download the full copy of Taranis 2023 Season Service Plans below!  If you would like to learn more or sign up for a demo, click here. 

    • Taranis 2022 Season Service Plans

      Download the full copy of Taranis 2022 Season Service Plans below!  If you would like to learn more or sign up for a demo, click here. 

    • Remote Scout with NDVI Layer

      In the remote scout feature, you can underlay an NDVI layer (or any layer available in the map layers) and correlate the SmartScout insights to the NDVI layer.  ​ First, select the field that you would like to take a deeper dive into from the fields ...